PRO Light Backloader Backpack M for CSC/DSLR
Holds full-frame CSC with attached grip and 70-200/2.8 lens New M-Guard™ provides the highest level of gear protection Safe rear access & top opening to 100% padded gear compartment SAS-TEC structural base reinforcement for extra shock protection Double side tripod connection points for...
€202.20Chroma Key FX 4x2.9m Background Kit Greenn
The largest reusable all in one Chroma Key background kit Ultra-Fast assembly time Ideal for working on location Huge working area, small pack down size Effortlessly packs down into included carry bag
€899.47Super Boom Pivot Clamp
pivoting clamp for use with all Super Booms and Heavy Duty Booms for 35mm diameter boom shafts 1/8'' male, and 5/8'' female receptor
€64.10PRO Light Tough TH-83 Case
Heavy-duty and lightweight photographic hard-case made in Italy IP67 testing approved for water and dust protection Built to withstand the toughest conditions of use Safe release system latches for optimum security and protection Durable 2-stage telescopic handle with self-locking system
€276.43Pivoting Clamp For Light Boom
It allows mounting of the 3085 Boom Arm to a heavy duty stand It permits tilt, swing and swivel Easy to use
€55.11SHORT ADAPTER SPIGOT 3/8''+3/8''
Spigot with two 3/8'' screws Versatile use Two 3/8'' screw attachments Made of Brass
€4.72B-Stock 100 cm foam lined bag
€106.35 €125.11
Overhead Frame 366x366cm Full Set
366x366 cm Overhead Frame Set Carrying Bag Basic Set of rags
€1,512.01B-Stock Collapsible Reflector Holder
Extend from 66 to 188cm (from 25 to 74 in) Made in aluminium black 3 sections
€70.83 €83.34Baby Roller Low Base 290cm/114in CS Base, Alu...
Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...
€411.38Baby Roller Stand High Low Base 3.4m/11.2' CS &...
Junior roller stand with folding leg base and braked wheels Very popular stand for holding LED, fresnels and smaller HMI's. 4 sections, 3 risers. Ø: 45, 40, 35, 30 mm. Steel column, aluminium risers & captive locking T-knob handles. Folding base great for self-standing storage when not in use
€504.95Repro Arm with Double Camera Attachment Black
Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment
€95.59Accessory Arm For 4 Heads
Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment 2 positional head mounts on the side arm for mounting of 4 hea
€154.97Baby Roller Stand High Low Base 4.3m/14.1' CS &...
Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 4 sections, 3 risers. Ø: 35, 30, 25, 20 mm. Leg Ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...
€449.62Table Attached Centre Post
Geared column with clamp Compatible with table thickness from 18-38mm Adjustable between 5cm and 66cm 3/8'' screw attachment
€223.80Stand Adapter from 5/8" to 1/2"
Top attachment 5/8'' (16mm) stud Attachement 5/8'' (16mm) socket Aluminium Construction 9,7cm in height
€15.52ADJUSTABLE GAFFER GRIP
25mm to 65mm gaffer grip for great versatility Adjustable jaws ensure a tight and secure grip Complete with two 16mm baby studs for added versatility Designed with world-leading Italian quality standards Gaffer grip attaches to a wide range of accessories
€60.50Extension Bar Black For Super Clamps
16mm Hexgon stud for Super Clamp Top attachment 16mm Hexgon stud for Super Clamp Used to fix two superclamp 16,5cm in height
€14.62Heavy Extension Aluminium One Section Black
€82.10
Black Aluminium Extension 2-Section Stand
It extends the height of your heavy duty cine stand 49.2 - 82.7'' It has two black sections, one riser Made of aluminium
€112.24Barrel Clamp, Silver w/Wingnut
€111.34
Steel Extension 2-Section Stand
Minimum extension is 4.3ft (1.3m), the maximum is 7.25ft (2.2m) One riser is 35mm in diameter, the second is 30mm in diameter Chrome steel extension
€118.98Camera/Umbrella Bracket For 143
Standard 1/4-20 inch thread mount for cameras Replacement camera platform for the Magic Arm Made of aluminium Standard 1/4 thread for cameras
€19.12Drop Ceiling Scissor Clamp w/Baby Pin 16mm/ 5/8in
16 mm/ 5/8'' baby pin: scissor clip designed for drop ceilings Ideal for small and medium light fixtures Works well with C1005 to hold cables Easily tighten and remove scissor clip by spinning the baby pin Special adapters should be carried in all kits
€17.77Fork for Styrene Gobos
For polystyrene Gobo's Supplied with 1/4'' and 3/8''female attachments Robust construction Size: 12,5 x 20cm
€17.77Drop Ceiling Scissor Clip with Cable Support
Cable support with scissor clip designed for drop ceilings Ideal to support cables and cords from drop ceilings Works well with C1000 baby pin scissor clips Easily tighten and remove scissor clip by turning thumb screw Special adapters should be carried in all kits
€23.62Black Aluminium High Stand Extension
It extends a duty stand of additional 53 - 123.6'' (1.4 - 3.1 m) It has two locking riser sections Made of aluminium
€143.72Super Clamp™ T-Knob Silver, 13mm-55mm/0.51 to...
Super Clamp™ jaws work on diameters from 13-55mm/ 0.51-2.16'' TÜV/SÜD certified Load capacity:15 kg/33.1 lbs, used with numerous adapters & arms 16 mm/ 5/8'' hexagonal receiver with double safety lock Available in an HD Gravity Cast version- C1550
€49.26Steel High Stand Extension
It extends a duty stand of additional 53 - 123.6'' (1.4 - 3.1 m) It has two locking riser sections This steel stand extension has a chrome finish
€154.07Eye Coupler MP Clamp w/Wingnut...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Base model MP with non-threaded 12.5 mm/0.5'' hole. Customisable Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€31.26Short Adapter Spigot 3/8'' and 1/4''
Spigot with 1/4'' and 3/8'' screws Versatile use 3/8'' to 1/4'' screw attachments Made of Brass
€4.72Floppy Cutter 60cm x 120cm (24" x 48")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€184.45Eye Coupler MP Clamp w/28mm/1 1/8'' Spigot,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with junior 28 mm/1 1/8'' TV Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€41.61ADAPTER SMALL 3/8 TO 1/4 SET 5
Reducing Bushing Set, from female 3/8'' to 1/4'' male screw Female adapter 3/8'' to 1/4'' Made from Nickel plated Steel 0,5cm in height
€5.62Floppy Cutter 60cm x 180cm (24" x 70")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€238.00Eye Coupler MP Clamp w/16mm/5/8in Spigot,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with baby 16 mm/ 5/8'' Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€39.36Adapter Stud 5/8'' to 3/8'' thread
1/4'' screw, 5/8'' (16mm) stud Attachement 3/8'' to 1/4'' screw 2,6cm in height Made of Brass
€7.87Floppy Cutter 100cm x 100cm (40" x 40")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€214.20Eye Coupler MP w/M12 Bolt & Nut,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP Eye Coupler w/M12 bolt & wing nut. Direct connection to yokes Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€32.6116mm Female Adapter 17.5 to 5/8''
5/8'' (16 mm) stud and a socket for 11/16'' (17.5 mm) male studs 5/8'' to 17,5mm female adapter Easy to mount 7,8 cm in height
€17.77Cutter 25cm x 100cm (10" x 40")
Black solid flag (Cutter) for light control purposes, Used to control natural or artificial light, The smallest useful Cutter Size from Udengo
€77.35Eye Coupler MP w/Baby Receiver,...
Joined twin MP couplers free to swivel a full 360° radius Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Easily connect trusses, bars or pipes Made from aluminium in a silver finish Wing nut tightening to secure both swivel couplers in place
€65.0016mm Female Adapter 5/8''
It is 3.46'' (8.8 cm) long Its unique indentations mesh perfectly with the locking screw 8,8cm in length 16mm female adpater 5/8
€14.62Overhead Frame 366x366cm QR Set
366x366cm Overhead Frame Set
€765.65MP Eye Coupler Swivel Tilt 150
Aluminum Construction 6 - 10" Length 1 1/8" Junior Stud
€145.08Microphone Support "T" Arm, Black
Microphone support that attaches with a 16mm pin Measures just 65cm in length Made from durable aluminium Allows you to easily tailor your kit Crafted to Italy’s world-leading quality standards
€100.99Gel Frame 60x60cm (24x24")
€77.35
Double Ball Joint Head
Extremely versatile camera support Perfect to be used in conjunction with the Super Clamp system Features camera platform supplied with a 1/4-20'' screw Max payload 5.0Kg (11lb) Height 14,5cm (5,7in)
€59.61